rev c pol16 - 05t series 16a output current rating dc/dc open frame power converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 1 of 5 smd package vertical sip package horizontal sip package size: 1.30in x 0.53in x 0.30in size: 2.00in x 0.50in x 0.28in size: 2.00in x 0.50in x 0.28in options features ? smd or sip package type ? vertical or horizontal mounting for sip package ? rem ote control positive or negative logic ? ? ? ? ? ? ? ? ? ? ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment ? m icroprocessor power applications the pol16 - 05t series of dc/dc open frame power converters offers 16a output current rating in a compact and low profile package. this series consists of single output models with an input voltage range of 2.4~5.5vdc. seve ral options are available such as smd or sip package and remote control positive or negative logic. each model in this series is ce marked, compliant to rohs ii & reach, and has over load, short circuit, and over temperature protection. this series has ul6 0950- 1, en60950 - 1, and iec6095 - 1 safety approvals. please call factory for order details. model selection table model number input voltage range output voltage output current @full load no load input current 0.75vdc/3.3vdc package type maximum capaciti ve load (1) efficiency (2) remote on/off pols16 - 05t 2.4~5.5vdc 0.75~3.3vdc 16a 100/130ma smd 100/5000 f 95% positive pols16 - 05t - p negativ e polt16 - 05t 2.4~5.5vdc 0.75~3.3vdc 16a 100/130ma vertical sip 100/5000 f 95% positive polt16 - 05t - p neg ative polt16 - 05ta 2.4~5.5vdc 0.75~3.3vdc 16a 100/130ma horizontal sip 100/5000 f 95% positive polt16 - 05ta - p negative
rev c pol16 - 05t series 16a output current rating dc/dc open frame power converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 2 of 5 specifications all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwis e noted. we reserve the right to change specifications based on technological advances. specification test conditions min typ max unit input specifications input voltage range vout(set) < vin - 0.5vdc 2.4 5 5.5 vdc maximum input current vin=2.4 to 5.5vdc , io=io(max) 16 a input reflected ripple current 5~20mhz, 1 h source impedance 100 map - p start - up voltage 2.2 vdc shutdown voltage 2.0 vdc input filter (3) capacitor type output specifications output voltage see table voltage accuracy % o f vout(set) - 2.0 +2.0 % line regulation vin=vout(set) +0.5vdc to vin(max.) at full load; % of vout(set) - 0.3 +0.3 % load regulation no load to full load; % of vout(set) - 0.4 +0.4 % voltage adjustability (4) 0.7525 3.63 vdc remote sense 0.5 vd c output current see table maximum capacitive load see table ripple & noise measured by 20mhz bandwidth, with a 1 f mlcc & a 10 f t/c 15 mvrms 50 mvp - p dynamic load response with a 1 f mlcc & a 10 f t/c 150 mv 50% load step chang e setting time (vout<10%peak deviation) 100 s temperature coefficient - 0.4 +0.4 %/ o c remote on/off control (5)(6) negative logic ( option ) dc - dc on open or 0~0.3vdc dc - dc off 1.5vdc~vin(max.) positive logic (standard ) dc - dc on open or vin(max.) dc - dc off 0~0.3vdc input current of ctrl pin 0.01 1.0 ma remote off input current 1.5 ma turn - on delay time (7) 1 ms rise time time for vout to rise from 10% to 90% of vout(set) 6 ms output voltage overshoot - startup vin=2.4~5.5vdc at full lo ad; % of vout(set) 1.0 % protection short circuit protection continuous, automatic recovery over load protection % of iout rated 180 % over temperature protection 125 o c environmental specifications operating case temperature with derating - 4 0 +85 o c storage temperature - 55 +125 o c relative humidity non - condensing 5 95 %rh thermal shock mil - std - 810f vibration mil - std - 810f mtbf mil - hdbk - 217f, full load 3,238,000 hours general specifications efficiency see table switching freque ncy 270 300 330 khz physical specifications weight 0.21oz (6.0g) dimensions (l x w x h) smd package 1.30in x 0.53in x 0.30in (33.0mm x 13.5mm x 7.6mm) sip package 2.00in x 0.50in x 0.28in (50.8mm x 12.7mm x 7.2mm) safety characteristics safety a pprovals ul60950 - 1, en60950 - 1, iec60950 - 1 lead- free reflow solder process ipc j - std - 020d moisture sensitivity level (msl) ipc j - std - 033b, level 2a
rev c pol16 - 05t series 16a output current rating dc/dc open frame power converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 3 of 5 notes 1. test by minimum input and constant resistive load. esr 1m / esr10m 2. vin(nom) 3.3vdc@ full load 3. it is necessary to equip the external input capacitors at the input of the module. the capacitors should connect as close as possible to the input terminals that ensuring module stability. the external cin is 4pc s of 150f low - esr polymer capacitors // 4pcs of 47f ceramic capacitors at least. 4. output voltage programmable from 0.75v to 3.3v by connecting a single resistor (shown as trim table) between the trim and gnd pins of the module. to calculate the value of t he resistor rtrim for a particular output voltage vout, use the following: trim figure trim table 5. remote on/off referred to ? vin pin 6. positive logic: on/off is open collector/drain logic input negative logic: on/off pin is open collector/drain logic input with external pull ? up resistor 7. case 1: on/off input is set to logic low (module on) and then input power is applied (delay from instant at which vin=vin(min .) unti l vout=10% of vout(set)) case 2: input power is applied for at least one second and then the on/off input is set to logic low (delay from instant at w hich von/off=0.3vdc until vout=10% of vout(set)) caution: this power module is not internally fused. an in put line fuse must always be used. * due to advances in technology, specifications subject to change without notice. characteristic curves pols16 - 05t, vout=3.3v derating curve pols16 - 05t, vout=3.3v efficiency vs. input voltage pols16 - 05t, vout=3.3v efficiency vs. output load
rev c pol16 - 05t series 16a output current rating dc/dc open frame power converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 4 of 5 mechanical drawing s pols16 - 05t pin connection s pin define 1 ctrl 2 +sense 3 trim 4 +vout 5 gnd 6 +vin polt16 - 05t pin connections pin define 1 +vout 2 +vout 3 +sense 4 +vout 5 gnd 6 gnd 7 +vin 8 +vin 10 trim 11 ctrl polt16 - 05ta pin connections pin define 1 +vout 2 +vout 3 +sense 4 +vout 5 gnd 6 gnd 7 +vin 8 +vin 10 trim 11 ctrl notes: all dimensions in inch (mm) tolerance: x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) pin pitch tolerance 0.01 (0.25) pin dimension tolerance 0.004(0.1)
rev c pol16 - 05t series 16a output current rating dc/dc open frame power converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 5 of 5 model number setup polt 16 - 05 t - p se ries name output current input voltage output quantity remote control option pols: smd type 05: 2.4~5.5vdc t: no assembly (smd type) none: positive logic polt: sip type t: vertical mounting (sip type) p: negative logic ta: hori ztontal mounting (sip type) company information wall industries, inc. has created custom and modified units for over 50 years. our in - house research and development engineers will provide a solution t hat exceeds your performance requirements on - time and on budget. our iso9001 - 2008 certification is just one example of our commitment to producing a high quality, well - documented product for our customers. our past projects demonstrate our commitment to y ou, our customer. wall industries, inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. we will continue to provide ongoing support for your project above and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone: ? (603)778- 2300 toll free: ? (888)597 - 9255 fax: ? (603)778- 9797 e - mail: sales@wallindustries.com web: www.wallindustries.com address: 37 industrial drive exeter, nh 03833
|
